ReadyMadeRC
GRAUPNER SPORT-PROP 8"X4.5" LEFT
,
Overviews The new Graupner SPORT PROP propellers are designed primarily ...ReadyMadeRC
GRAUPNER SPORT-PROP 8"X4.5"
,
Overviews The new Graupner SPORT PROP propellers are designed primarily ...ReadyMadeRC
GOPRO BATTERY BACPAC 3.0
| Removable battery pack that attaches to your GoPro to extend battery life. Compatibility | HERO4, HERO3+, HERO3 |
Restrictions:, According to GoPro policy, sales of the GoPro cameras from this store are restricted to the United States only.,
The Battery BacPac is a removable battery pack that seamlessly ...ReadyMadeRC
GOPRO - DUAL CAMERA HOUSING GOPRO+CCD HERO1&2 - BLACK
"Snap-In"-Mechanism for a complete protection and a stable mounting:, We are especially proud of this, thats why the housing has been named after it: Due to a front-plate with a "snap"-mechanism, the box is completely sealed. There is no open side, which means the GoPro is completely safe inside and can't fall out. Also you do not need any rubber or zip-tie to close it., :, The housing comes with everything you need to install one of the widely available replacement lenses (for the skeleton-housing). It does not need to be glued in, but instead is being hold perfectly tight by 3 nylon screws. This way the lens can be used in different front-plates and/or housings., :, By using the 3 countersunk screws and the buttefly nuts included in the Quadrixette 30-frames, the housing can be mounted very flexible, :, "Snap" can be easily installed/uninstalled on the Quadrixette 30/40. This way you can quickly change between different cameras if needed., The special thing: The GoPro can be mounted, so that the lens indeed is really in the middle of the frame, not "a bit" tending to one side (which looks stupid on video).,
"Click" is a mounting system for cameras in the FPV-area. ...ReadyMadeRC
XOAR PJP-N PRECISION MATCHED PAIR - 11X5
Please Note: Final balance check is suggested before flight due to external factors such as temperature, handling during transit may vary the balance of the propeller.,
Please do not back order. Xoar PJP-N Beechwood Electric Precision ...ReadyMadeRC
XOAR PJP-N PRECISION MATCHED PAIR - 10X5
Please Note: Final balance check is suggested before flight due to external factors such as temperature, handling during transit may vary the balance of the propeller.,
Xoar PJP-N Beechwood Electric Precision Pair is for model planes ...ReadyMadeRC
F4U-1A CORSAIR PNP
| Wingspan | 44.0 in (1120mm) |
| Overall Length | 36.0 in (915mm) |
| Motor Size | 15-size 950Kv brushless outrunner (installed) |
| Radio | 4+ channel minimum radio system required (6+ for flaps and retracts) |
| Prop Size | 9.5 x 7.5 |
| Speed Control | 30-amp Pro Switch-Mode BEC brushless ESC (installed) |
| Recommended Battery | 11.1V 3S 2200mAh 25C Li-Po |
| Flaps | Optional |
| Retracts | Optional |
| Control Throw (Ailerons) | Low |
| Control Throw (Elevator) | Low |
| Control Throw (Rudder) | Low |
| Control Throw (Flaps) | Half |
| Minimum Age Recommendation | 14 years |
| Experience Level | Intermediate |
| Recommended Environment | Outdoor |
| Assembly Time | Less than 1 Hour |
| Is Assembly Required | Yes |
Flying Weight: 43.4 oz (1230 g) with drop tanks installed; 46.6 oz (1320 g) with tanks, retracts and flaps installed,
Take to the Skies with the Famous Gull-Wing Fighter from ...ReadyMadeRC
PARKZONE - F4U-1A CORSAIR BNF PKZ6080
| Wingspan | 44.0 in (1120mm) |
| Overall Length | 36.0 in (915mm) |
| Motor Size | 15-size 950Kv brushless outrunner (installed) |
| Radio | AR600 6-channel DSMX® receiver (installed) |
| Prop Size | 9.5 x 7.5 |
| Speed Control | 30-amp Pro Switch-Mode BEC brushless ESC (installed) |
| Recommended Battery | 11.1V 3S 2200mAh 25C Li-Po (included) |
| Flaps | Optional |
| Retracts | Optional |
| Control Throw (Ailerons) | Low |
| Control Throw (Elevator) | Low |
| Control Throw (Rudder) | Low |
| Control Throw (Flaps) | Half |
| Charger | 2- to 3-cell DC variable rate Li-Po charger (included) |
| Minimum Age Recommendation | 14 years |
| Experience Level | Intermediate |
| Recommended Environment | Outdoor |
| Assembly Time | Less than 1 Hour |
| Is Assembly Required | Yes |
Flying Weight: 43.4 oz (1230 g) with drop tanks installed; 46.6 oz (1320 g) with tanks, retracts and flaps installed,
Take to the Skies with the Famous Gull-Wing Fighter from ...ReadyMadeRC
CARBON-Z CUB BNF BASIC
| Wingspan | 84.6 in (215 cm) |
| Overall Length | 55.8 in (142 cm) |
| Wing Area | 1100 sq. in. (71.0 sq. dm.) |
| Flying Weight | 8.15 lb (3.70 kg) |
| Motor Size | 50-size brushless outrunner (installed) |
| Radio | 6+ channel DSM2/DSMX transmitter (required) |
| Servos | (4) 26-gram MG mini servos, (2) 13-gram micro servos (installed) |
| CG (center of gravity) | 4.72 in (120mm) back from leading edge of wing |
| Wing Loading | 17 oz/sq ft |
| Prop Size | 15 x 5.5 Electric (included) |
| Speed Control | 60-amp brushless (installed) |
| Recommended Battery | 22.2V 6S 3200mAh LiPo (required) |
| Flaps | Yes |
| Approx. Flying Duration | 7 minutes |
| Minimum Age Recommendation | 14 years |
| Experience Level | Intermediate |
| Recommended Environment | Outdoor |
| Assembly Time | Less than 1 Hour |
| Is Assembly Required | Yes |
| Spinner Size | 2.64 in (67mm) |
Optional Accessories:, - Float set (EFL1045016), Retracts: No,
Features Easy-to-complete final assembly Quique Somenzini design and attention to ...ReadyMadeRC
PARKZONE ARCHER BNF
| Wingspan | 36.8 in (935mm) |
| Overall Length | 25.6 in (650mm) |
| Flying Weight | 16.4 oz (466 g) |
| Motor Size | 370-size 1300Kv brushless outrunner (installed) |
| Radio | AR400 4-channel receiver (installed) |
| Trim Scheme Colors | Red, grey, black and white |
| CG (center of gravity) | 1.6 in (40mm) back from the leading edge of wing |
| Prop Size | 8.25 x 5.5 |
| Spinner Size | 1.0 in (25mm) |
| Speed Control | 10-amp (installed) |
| Recommended Battery | 7.4V 2S 1300mAh 20C Li-Po (included) |
| Charger | 2S DC Li-Po balancing charger (included) |
| Minimum Age Recommendation | 14 years |
| Experience Level | Intermediate |
| Recommended Environment | Outdoor |
| Assembly Time | Less than 1 Hour |
| Is Assembly Required | Yes |
Flaps: No, Retracts: No,
Features 4-channel control—throttle, elevator, aileron and rudder Powerful 370-size, 1300Kv ...ReadyMadeRC
SPEKTRUM ULTRA MICRO FPV CAMERA AND VTX SPMVA1100
| Modulation | Analog NTSC |
| Band | 5.8GHz |
| Experience Level | Beginner |
# of Channels: 7,
This amazing bit of Spektrum™ technology is perfect for ultra ...ReadyMadeRC
PARKZONE - MOSQUITO MK VI BNF PKZ6350
| Wingspan | 1244mm (49.0 in) |
| Overall Length | 955mm (37.6 in) |
| Flying Weight | 42.3 oz (1200 g), 44.4 oz (1260 g) with flaps servos and retracts installed |
| Motor Size | (2) 370-size brushless outunner |
| Radio | 4+ channel (6+ channel for optional retracts and flaps) required |
| Servos | (2) DSV130 and (2) SV80 servos (installed) |
| CG (center of gravity) | 2.90-3.30 (73-83mm) back from the leading edge of wing at fuselage |
| Prop Size | 8.25 x 5.5 |
| Speed Control | (2) 18-amp brushless (installed) |
| Recommended Battery | 11.1V 3S 2200mAh 25C LiPo (required) |
| Flaps | Optional (servo |
| Retracts | Optional (EFLG100) |
| Control Throw (Ailerons) | Low |
| Control Throw (Elevator) | Low |
| Control Throw (Rudder) | Low |
| Control Throw (Flaps) | Half |
| Minimum Age Recommendation | 14 years |
| Experience Level | Intermediate |
| Recommended Environment | Outdoor |
| Assembly Time | Less than 1 Hour |
| Is Assembly Required | Yes |
ReadyMadeRC
NIGHT VAPOR RTF
| Wingspan | 14.8 in (376mm) |
| Overall Length | 15.3 in (389mm) |
| Flying Weight | 16.4 g (0.6oz) |
| Prop Size | 140mm x 45mm |
| Recommended Battery | 70mAh 3.7V 14C Li-Po |
Is Assembly Required: No,
Like the original Vapor® aircraft, the Night Vapor™ model is ...ReadyMadeRC
EZTRACKER ANTENNA TRACKER V2
Supplied with:,
The innovative ImmersionRC Antenna Tracker performs the almost magical task ...ReadyMadeRC
150A CURRENT SENSOR
,
SPECIFICATION Compatibility FrSky Smart Port enabled receivers, such as X8R,X6R, ...